*8-3 Group 3 Somerset 2010

Finishing Holder

2010-06-10T13:42:00.000-07:00

6-3-10

2010-06-03T10:58:00.000-07:00

today i started to paint the last three pieces of wood and did not get done so next time i will paint the last two pieces

5-28-10

2010-05-28T11:42:00.000-07:00

Today i sanded the last two pieces of skate board wood and painted 6 pieces of skate board wood next class i will paint the 3 pieces of long wood for the base of the clip board shelf

5-25-10

2010-05-25T07:01:00.000-07:00

i did more sanding today next class two more pieces to sand and then painting

5-12-10

2010-05-12T10:56:00.000-07:00

today i trimmed wood and sanded it

5-4-10

2010-05-04T11:08:00.000-07:00

today i measured and cut wood. i cut the skate board pieces.

4-26-10

2010-04-26T11:04:00.000-07:00

we got measurements for our project. Our skateboard pieces are 9 inches by 7 1/2 inches. We need 6 of these. We also need a piece of wood that is approximately 4 feet long by 7 1/2 inches wide.

logo

2010-04-12T11:16:00.000-07:00

everything before this is not somerset 2010

2010-03-26T10:46:00.000-07:00

Completed Project

2010-01-15T14:29:00.000-08:00

12-15-09

2009-12-15T06:33:00.000-08:00

Today we are attaching vinyl to cushions.

12-11-09

2009-12-11T08:01:00.000-08:00

We are spray gluing and attaching the wonderful cushions. We are going to attach the vinyl after we have finished the spray-gluing. We are almost done after we get the pipe covering.

12-4-09

2009-12-04T07:57:00.000-08:00

Today we got vinyl and foam so we are making the CUSHIONS!

12-1-09

2009-12-01T06:31:00.000-08:00

Today we are cutting Masonite for the cushions. Hopefully we can get pipecovering so the recliner thingy doesnt make a huge sound when it goes back.

11-20-09

2009-11-20T08:05:00.000-08:00

Today we are getting measurements for the cushions and padding and if we get that done we will start thinking about how the chair reclines and making a handle on the side to make it recline. We finished the footrest.

11-17-09

2009-11-17T06:54:00.001-08:00

Today we finished with the foot rest and tightened the top bolts. We talked about cushions and decided on leather or if we cannot get that, vinyl.

11-13-09

2009-11-13T07:57:00.001-08:00

Sand more foot boards and paint'em then put'em on.

11-10-09

2009-11-13T07:56:00.000-08:00

We painted where we sanded and finished sanding.

11-6-09

2009-11-13T07:54:00.000-08:00

We sanded the boards that were jagged on the edges. Damon blogged. Kristen and Taylor sanded.

11-3-09

2009-11-03T06:20:00.000-08:00

today we have to tighten the bolts on the top bolts and then put the foot boards on and we have to use a new board because the board we had before was too small for the foot rest. so we have to cut one up and sand it down. then next week we are planning to put the pads on the head of the chair and the foot of the chair.

10-22-09

2009-10-23T08:07:00.000-07:00

Today we drilled holes to attach the skateboards to it. We attached 2 skateboards to the top and we talked about what we are gunna do about the footrest and padding.

10-20-09

2009-10-20T06:51:00.000-07:00

Today we looked over the chair and looked at possibilities for cushions and such. We also noticed a gap in the chair and tried to come up with a solution towards that. We also asked Mr. Kelley if he could get us some leather to make the cushions with.

:P

2009-10-16T08:37:00.001-07:00

Everything before this post is not our amazing group.....so ignore it.

What were working on

2009-06-02T10:14:00.001-07:00

We are trying to combine the parts of two laptops that have different problems to make one with the good parts of each laptop.

New Project

2009-05-15T06:20:00.000-07:00

We ditched the wii remote idea a few weeks ago. Now we are repairing iBook G3's. We will not be selling the ones we repair.

Laser pens

2009-04-08T08:48:00.001-07:00

We are looking to purchase laser pens for low prices.

project

2009-04-08T08:47:00.000-07:00

we are looking at software for this project and expenses.

Wii remotes

2009-04-03T06:35:00.000-07:00

We are not buying the wii remotes ourselves, we are only selling the software to make the remote work as a computer pointer software.

Wii remote

2009-04-03T06:29:00.000-07:00

Today we are trying to find a cheap Wii remote online.

OUR posts

2009-04-03T06:26:00.000-07:00

All of the posts by brownhair4813 are not ours. our posts are the newer ones about the wii remotes. this is just to let you know.

prototype

2009-03-31T09:57:00.001-07:00

we are making a wii remote computer controll.

Today in classToday in class we finished putting xp on the laptops

2009-01-13T07:55:00.000-08:00

Today in class we finished putting xp on the laptops.

Class

2009-01-13T07:39:00.000-08:00

today in class we put xp on more computers.

Today in class

2009-01-13T07:36:00.000-08:00

Today we we are still putting xp on the laptops.

Today in class

2009-01-13T07:29:00.001-08:00

Today in class we put xp on more laptops. It takes a long time.

today

2009-01-13T07:26:00.002-08:00

Today in class we put xp on more of the computers.

Today

2008-11-25T08:16:00.000-08:00

Today in class we played games on the computers in the IT lab. I played the demo Hammer heads

2008-11-20T13:07:00.000-08:00

Yesterday in class Mr.Kelley Talked And Talked And Talked And Talked And Talked about internet safety and buying from various sites like Ebay because anything can happen if buying from online, for example he said that their are many phony sites that you can buy from so he told us to check out the site by either going to www.bbb.org or www.resellerratings and typing the company or site name and you then can get reviews,ratings,trustability,ETC... Also one of the other things that we did was we had to find the best price for a Pink 1GB Ipod Shuffle and the winner of it was Dayna...

Today

2008-10-31T08:21:00.000-07:00

Today we finished the inventory on the broken laptops.

Two days ago

2008-10-31T08:19:00.000-07:00

A couple of days ago we started inventory on the broken laptops.

Last week in class

2008-10-31T08:17:00.000-07:00

Last week in class we finished the inventory on the laptops that work.

Last week in class

2008-10-28T07:18:00.000-07:00

Last week in class we started to do inventory on the Lap tops.

Friday

2008-10-21T07:21:00.000-07:00

On Friday we had a sub in IT. We watched a movie on modern Marvels.

Last Week

2008-10-21T07:16:00.000-07:00

Last week in class we started putting Windows XP on the laptops. We had to put the disk in the laptops and started to load it onto some laptops.

Sketch Up

2008-10-07T07:19:00.000-07:00

A couple of weeks ago we worked on sketch up.

Here Are Us Fixing Old Ibooks

2008-10-07T07:12:00.000-07:00

E-mail

2008-09-30T07:24:00.000-07:00

Last week in IT we got our e-mails on first class.

New Group

2008-09-29T11:24:00.000-07:00

You Are Now Viewing The 2008-2009 8th classes Blog

FINISHED COMPUTER!

2008-06-24T12:50:00.000-07:00

Puting in the cpu

2008-05-23T05:41:00.000-07:00

this is a video were we put the cpu in our computer

Putting In the Card

2008-05-22T09:42:00.000-07:00

2008-05-22T09:38:00.000-07:00

Putting the Mother Board in

2008-05-22T09:26:00.000-07:00

Putting the CPU in

Putting In the Hard drive

2008-05-20T10:19:00.000-07:00

Looking at the directions

2008-05-13T10:02:00.000-07:00

This is Kyle and Caleb trying to
put the CPU into the computer

Putting In the Hard drive

2008-05-08T11:11:00.000-07:00

Inside the case

2008-05-02T07:48:00.000-07:00

This is when we frist time we got
the case

Kyle taking out something and Caleb accutally helping

2008-05-02T07:42:00.000-07:00

Stupid Caleb

2008-05-02T07:14:00.000-07:00

Caleb smiling like a idiot

Kyle is trying to put in the hard drive

2008-04-29T10:30:00.000-07:00

This is kyle puting in the hard drive

video of putting the computer together

2008-04-29T10:26:00.000-07:00

IT VIDEO 3

2008-04-29T10:03:00.000-07:00

IT VIDEO 2

2008-04-29T10:00:00.000-07:00

IT VIDEO 1

2008-03-25T10:04:00.000-07:00

Taking out the RAM STICK out.

Completed Computer

2008-01-12T15:36:00.001-08:00

Day 14 12-7

2007-12-07T08:41:00.000-08:00

Today we put in a belt and then we cleaned up all the wiring . Then took pictures.
B.M

Day 13 12-5

2007-12-05T07:59:00.000-08:00

Today we put more parts to our computer. We put the audio and the fire wire. Then we took pictures. Then we plugged in the hard drive. Then took more pictures.

Day 12 11-30

2007-11-30T08:49:00.001-08:00

We connected all the power and we put in the graphics card and then plugged it in. Then plugged the fan in. Then took more pictures.

Day 12 11-30

2007-11-30T08:49:00.000-08:00

We connected all the power and we put in the graphics card and then plugged it in. Then plugged the fan in. Then took more pictures. =P

Day 11-28

2007-11-30T08:46:00.000-08:00

We put the power supply in, the hard drive, C.D ROM, the mother board, the fan, and the chip. Then we took pictures of what we put in.

Day 10

2007-10-31T08:03:00.000-07:00

Today in I.T class we had a substitude today. Mr.Kelley left us to watch a video about some of the different things in a computer. and Facts about them and how to put them in. Then logged in to an account he gave us to take a test about the video we were watching on our computers.

Day 9

2007-10-31T08:02:00.000-07:00

In I.T class today Mr.Kelley taught us how to put the power supply in and then we put the Power Supply in out computers. It wasnt a very hard task to complete.

Day 9

2007-10-10T07:51:00.000-07:00

Today we found a new case. Mr. Kelley helped us make an new egg account! We emailed the case to him, and we chose a power supply. We chose the monitor.

Day 8

2007-10-05T09:00:00.000-07:00

original Mr. Kelley explain what each thing in the computer is. He talked about retail and OEM. (Manufacturer equipment)

CPU- Brain
Mother Board- Wiring
RAM- Memory
Hd- Long term memory
CD- Rom-/ Floppy -Video card- hearing,eyes,mouth,nose,smell.
Power Supply- Stomach
Case- Body

Day 6 10-3

2007-10-03T07:58:00.000-07:00

Mr. Kelley talked to us about how to run the camera and the videos. Then we made our last decision on the computer we picked. After we took out all the parts in the computer and we took pictures and videos of it. Then we had to put all the computer parts back in the right places.

Day 4

2007-09-28T08:28:00.001-07:00

Today we took apart a computer and put it back together while Mr. Kelley was explaining to us how to do it step by step and told us where everything plugged in and how everything worked.

<33>

Day 3- 9/19

2007-09-19T08:16:00.000-07:00

Today Mr.Kelly talked about power supply and a little bit about the cases. He told us bad things that could happen to the power supply. He told us about the different kinds of power supply. He talked about different watts for the power supply. And then the last thing we looked at our cases.

Day 2

2007-09-14T08:32:00.000-07:00

Today Mr. Kelley talked about buying cases, and the companies and insurance, and rebats. he took us down to the computer lab and talked about what we can spend on our computers. It has to be under $50.00 including shipping.

That was the end of their blog.

2007-09-12T08:04:00.000-07:00

Anything Below this was their computer.
Everything above this blog is our computer!

Completed Computer

2007-07-06T14:27:00.000-07:00

New Computer! Putting in RAM

2007-05-16T16:44:00.000-07:00

New Computer! Putting in Powersupply

2007-05-16T16:43:00.000-07:00

New Computer! Putting in CPU

2007-05-16T16:39:00.000-07:00

New Computer! Putting in Motherboard

2007-05-08T13:44:00.001-07:00

New Computer! Putting in CDRom & Hard Drive

2007-05-08T13:40:00.000-07:00

Logo

2007-05-03T09:01:00.001-07:00

James & Curtis

days

2007-05-03T08:52:00.001-07:00

Mr. Kelley talked about the difference between CD's. We already put in the CD rom and we are now going to put the hard drive in our computer. We are spending the rest of the period working and trying to get it together.

days

2007-05-03T08:50:00.000-07:00

Day 18

Today, we discussed computers and there companys and why they make computers the way they do. We talked about the proper ways to take apart the computer. We are also taking apart our practice computer. Next class, we will start building our computer we ordered.

Day 17

Today the class is continueing to take parts out of the practice computer. This time we are going to take the parts out and leave the parts out so that Mr. Kelly can inspect if we did them the right way. We will take out the C.D. ROM, the floppy, and the hard drive out.

Thursday, April 12, 2007
Day 16

Today Mr. Kelley told us to update our logo; he also taught us how to upload videos. He gave us a DVD to watch on how computers are made, and how animations are created. We talked to his nephew, and we watched an animated movie.

Monday, April 9, 2007
April 9th

Today we took apart an old computer case and whatched a DVD on how to take apart a CPU.

Day 15

Today in the beginning of class, Mr. Kelley went over what was acceptable and not acceptable for the use of our laptops, While many other students were in trouble because of this. One of us in our groups watched the DVD on computers. This DVD explained how computers work and how the first personal computer was made in '71. It also talked about the manufacturing on the DVD. While one of us was watching the DVD, the other was taking apart the computers that Mr. Kelley did not care about. Then, we rotated and another one of us watched the DVD so we all had the chance to watch it and take out and put back in the drive.

days

2007-05-03T08:49:00.000-07:00

Thursday, March 29, 2007
Day 14

Today we went over what apple is and how it's used. Then we got working computers for next week to take apart.

Thursday, March 22, 2007
Day 12
Today we are going to take apart a mini computer and put it back together.

Thursday, March 15, 2007
Day 11

Today we talked about the computers that Mr. Kelly ordered for us. He told about the stuff that we will need on our computers. Mr.Kelly also told us about how New Egg works. We should get our computers tomorrow.

Monday, March 12, 2007
Day 10

Today we are talking about administrating our blog.
Were also talking about which computer case we need to pick.
Were going though e-mails seeing if we sent Mr. Kelley an e-mail for our computer case.
We are talking about using credit cards for online buying.
We will have to put a review on newegg.com

Day 9

Today, Mr. Kelley helped us with fixing our blogs to how he wants them, and we finished up looking for cases and sending him an email of what case we want.

Thursday, March 1, 2007
Day 8

Today we came into class and Mr. Kelley continued his discussion on computer cases and what we can buy. He also handed out a sheet of paper that talks about making a logo for our group. It is due March 19th. He then let us get on the internet and look for cases.

2007-05-03T08:41:00.000-07:00

Monday, February 26, 2007
Day 7 --Notes

Today we came in late and we are now talking about computer cases.
2 kinds
laptop cases
desktops
certain kinds of towers.
Desktop- smaller spaces, heat problems.
Mid tower- there cd's
Full Tower
Sever box- More space
Cases can be made out of several things
plastic, steal or aluminum.
Steal- more sturdy and stronger
Price Ranges
Aluminum- most expensive
Aluminam- cooler
Plastic- can be shaped molded
Plastic - more than a steal case
color
shape
windows
fans
handlesSteal - the cheapest
Aestetics- looks of the computer

Day 7
Today in class we discussed what computer cases are good and bad. We talked about the difference between lap-tops and desk-tops, and what the'yre good for and bad for. We also discussed and learned about some parts on each.

Friday, February 16, 2007
Day 6

Today, we had to create another new blog, due to the fact that we could not seem to get into either of the old ones. We had to transfer all the data, and again worked on the groups blog.

Day 5

Today we worked on our blogs. We had to create a new blog due to the fact we couldn't access the old blog. We learned how to post, and how to let other people edit our blogs if they choose to.

Day 4
Today We worked on are blogs. Some of the other students weren't here because they had to go to Nokomis for something.

Day 3

Today we created our blogs. We will have to type in these blogs every time we have a class. We have been having trouble with are blog though.

Thursday, February 15, 2007
Day 2

Today the class was told more about what we were doing first and we talked about how we were going to keep track of our projects.

Day 1

The first day Mr. Kelly told us what we were going to do this semester and what other classes will be and have been doing. He also told us if someone saw him have on the same tie twice well get something.

Rebuilding Old Computer

2007-04-26T07:27:00.000-07:00

Taking Apart Old Computer

2007-04-23T12:09:00.001-07:00

First Entry?

2007-04-01T16:57:00.001-07:00

Entries